Are you wondering if there is something wrong with your brakes? If you have, chances are something is going on that requires special attention. Learn more about this topic in this post that Bill Rigdon AMSOIL Dealer has for you and ensure you and your vehicle are protected.
Your brakes are one of the most important aspects of your car, reason to why you should ensure they are always working correctly. If you have noticed weird sounds or your brake pedals being weak and spongy, chances are there is something that needs to be checked out. If you are wondering what may be the causes of your brakes acting out, then this article is for you. Learn more about the topic in this post that Bill Rigdon AMSOIL Dealer in Portland, OR, has for you.
Is Your Car Pulling to One Side?
A car pulling to one side can be quite dangerous. This can be caused by several reasons, but the most common cause is a frozen caliper. This can happen over an extended period of time, reason to why it can go unnoticed and become more challenging to identify. Calipers can freeze by the piston of the caliper becoming stuck and the dust boot that protects the piston from the elements getting torn. Elements like water and junk can penetrate the metal, causing it to rust. This problem gets solved by getting the caliper replaced.
If you notice your brake pedal has started to lose pressure and is going closer to the floor than necessary, you might be in danger of losing braking capability. Different reasons can cause this:
Your brake fluid levels are low: this is something that can be easily fixed. All you have to do is check your brake fluid level and, if necessary, fill it up to the mark on the side to the reservoir.
Your master cylinder is in bad shape: this can be the reason your brakes have no pressure. A bad master cylinder can, unfortunately, not be fixed and needs to be replaced.
Your Breaks Are Weak
If you are needing a longer time to break and come to a stop and have noticed that your brakes have become weak, there are a few reasons that may be causing it:
Your brake pads are worn: this is one of the most common reasons for having soft breaks. Your breaks should never feel low, so having your brake pads replaces is the way to go. Ensure you don’t overlook this issue, as it may lead you to be in a dangerous situation.
Your brake fluid is contaminated: contaminants can come in even trough the smallest of spaces, so there might be a chance that this is causing your brake fluid to work incorrectly. You can fix this by bleeding your brakes and replacing your old fluid with new and clean brake fluid.
Does Your Steering Wheel Shake When You Apply Your brakes?
If your steering wheel shakes when you are driving at high speed and apply your breaks, one reason may be that your front rotors are warped and there are irregularities on your rotors caused by too much heat. Over time, these irregularities can cause hour brakes to pulsate, making your steering wheel shake. This can be solved by resurfacing your rotors or by getting them replaced.
Make Your Rotors Last Longer
This can be achieved by taking some precautions or changing your driving habits. The first thing you can do is ensure you are driving with precaution, oven speed limits, and ensuring you aren’t in a situation where you have to come to last-minute braking. Try not to tailgate, leave enough room to be able to decelerate without having to put your brakes into distress. To ensure you are taking proper care of your braking system, it is recommended to have your brakes inspected at least once a year.
Take Proper Care of Your Brakes With the Help of the Professionals at Bill Rigdon AMSOIL Dealer
Using the best products can help your brakes to be protected and work properly. AMSOIL DOT 3 and DOT 4 Synthetic Brake Fluidmaintains maximum ABS and traction-control performance to ensure your vehicle is safe in the road. Learn about the benefits of a synthetic oil change by speaking with an expert at Bill Rigdon AMSOIL Dealer in Portland, OR. Visit their online store and call (503) 329-9004 for more information.